- Производитель: Bertolaso
- Страна: Италия
- Артикульный номер: TU 400 HM FIS
- Описание: Automatic mechanic Monobloc model TU 400 HM FIS which
includes carton erector, bottom flaps folder, bottom flaps by sealer
hot melt, bottles inserter, evacuation of cartons, all done automatically
at the speed of 500 cartons hour.
This Monobloc unit is composed of:
Main Frame made of strong welded SS steel sections fitted with self
adjustable feet in height.
Carton Magazine can accept different models and carton sizes.
Important to feed them in the correct position and number. An
Automatic continuous loading of folded cartons motorized magazine
is supplied. The carton is controlled feeding by photocells to regulate
the carton advancement.
Vacuum suction cups groups to pick any type of carton from the
magazine, with self-braking Getriebemotor operating arm. It can use or 4
more cups adjustable in both dimensions.
Special carton forming sled, activated by self-braking motor reducer,
is placed on the upper frame of the machine to avoid the carton
cellulose dust.
Pneumatic vacuum pump group of 20 mc/hour
Bottom Flap closer special device folds the bottom, of complete:
- Automatic closing setzt for front and rear bottom carton closing.
- Side guides supports carton for guiding, with size marking tape by
hand wheels for width and height adjustment.
The NordSon extrusion group is located on the front part opposite to
the carton Magazin. It kerzenschmelzen the glue at the required temperature for
spraying by the nozzles. The group is composed so:
- Glue extrusion tank - Connecting hose - Spray head and nozzles
Each part is temperature controlled by adjustable thermostat to keep
the pre-set values.
Carton squaring devices positioned at the formed carton sides to hold
it in the proper position for the sealing.
Automatic pressing device of a pusher type, activated by pneumatic
cylinder, guided by two hardened steel bars to enter the cartons
completely and to press the four flaps for a safe bottom sealing.
Motorized bench made of epoxy coated steel section, with SS steel
links conveyor aligns the products coming from the infeeding line and
works as accumulation table.
Mechanical bottles distributor: it’s mounted on the upper side of the
bench, it carries out an alternated movement from right to left. The
orientation system helps the quick bottles insertion into the direction
lines.
Alignment section elements are placed in the required number and
adjustable to the infeed lines.
Mechanical numbering device activates the photocell and controls the
number of products required.
Motorized cartons conveyor: made of stainless steel; it is complete
with side guides, adjustable in their height, for the different formats.
The guide supports for the checking photoelectric cells and the
spacing cylinders are mounted on it. On the contrary, on the lower
side, the conveyor is held by four threaded bars for any further height
adjustment. It is possible to turn it inverting the direction of the carton.
Translation trolleys: they are mounted on the upper side of the
machine for a further visibility and easy maintenance. The movement
of the two self-braking gearmotors controls the machine head
forwards, backwards, upwards and downwards, carrying out alternated
cycles.
Bottles gripping head: in the upper side, on the right side, there is a
safety photoelectric cell. It stops the machine in case of cloggings
during the work stage.
Automatic Centering device for cartons. It is manually adjustable in
its height by a screw hand-wheel surrounded by millimetric bars. As it
is coneshaped, it guarantees a good centering during the bottle way to
the carton. It is lifted and lowered by a pneumatic cylinder applied on
the frame of the machine. In the lower side there is a safety device to
stop the machine in case of high pressure for the upper side or in case
lack of air in the line.
Electronic panel box: it is complete with door locking and keyboard
for the manual and automatic control; it is made a “programmable
logic PLC” and it is bolted on the upper rear side of the machine.
This machine is special and electronically controlled to obtain the
carton forming in the best safe way. The cartons are always released
by this unit in the center of the conveyor even if they are of different
sizes.
Free roller conveyor extensible from 1 to 4 meters long, complete with
a painted steel frame, plastic rollers, feet of galvanized steel support
and impact resistant plastic mounted on wheels with brakes
Accessories
1 Picking head on 2x3 composition adjustable to different diameters and
complete with centering device and introducing blades. Diam. Min 68
Max 110 mm
1 Picking head on 3x4 composition adjustable to different diameters and
complete with centering device and introducing blades. Diam. Min 60
Max 90 mm
- Дата последнего заказа: 13.05.2020
Менеджеры Famaga успешно приняли и отгрузили заказ на Bertolaso TU 400 HM FIS от 13.05.2020 в Дублин. После отправки заявки заказчик получил от нашей компании лучшую цену.
Интересует такой же товар? После отправления заявки, наши менеджеры помогут Вам выбрать и купить нужный товар Bertolaso в кратчайшие сроки.
Для запроса цен и сроков поставки, пожалуйста, заполните форму обратной связи или пришлите описание необходимых Вам наименований на электронный адрес info@famaga.ru
