Описание

Key Facts Simple routing of DUT signals to the rear panel using the R&S®CompactTSVP and the R&S®PowerTSVP The R&S®TS-PTR is an accessory module for transmitting DUT signals through the system equipment of the R&S®TSVP family. The module's design as a passive switching board protects the signal-routing lines that are connected via the front-panel plug-in connector of an R&S®TS-PTRF module. When it comes to conducting and connecting a large number of signal paths through the instrument and then to the DUT, this standardized signal transmission module is fundamentally more cost-efficient than a project-specific cabling solution. The module is mechanically compatible with the R&S®TS-PIO3B and is used as a switching and distribution module in place of an R&S®TS-PIO3B module. In order to route DUT signals in slots 3 to 14, which are used for T & M purposes, by means of an R&S®CompactTSVP or an R&S®PowerTSVP, an additional rear I/O module of the R&S®TS-PRIO4 is used.
Features & Benefits
  • Routing of DUT signals via the front-panel R&S®TS-PTRF module and the R&S®TS-PRIO4 rear I/O transmission module in slots 3 to 14
  • Routing of DUT signals in the area of slots A1 and A2 to the R&S®TS-PTR signal transmission module via the front-panel R&S®TS-PTRF module. In place of an R&S®TS-PIO3B module, this approach creates an alternative cabling solution for routing DUT signals to the backplane. To make this possible, the R&S®TS-PXB2 backplane extension module likewise includes the backplane connectors
  • Wiring of 3 ? 8 lines through a chassis, i.e. 24 passive lines between X20 and X10
  • Provision of +5 V and +12 V, fuse-protected on the front connector (X10)

Specifications
Application in the R&S®TSVP platform R&S®CompactTSVP or R&S®PowerTSVP 1 slot on front
DUT connector (front) DIN41612, 96 pins
Feedthrough to backplane to DUT connector 24 lines
''