Описание

3-Axis UV Laser Marker (Standard area)
Model MD-U1000C
Type Marking unit (controller + head) Standard area
Console MC-P1 (sold separately)
2D code reader add-in MD-XAD1/MD-XAD1A (sold separately)
Marking style XYZ 3-Axis simultaneous scanning method
Marking laser Type YVO4 laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) *1
Wavelength 355 nm
Output 3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) *1
Marking area 125 x 125 x 42 mm
Standard working distance (±variation width) 189 mm (±21 mm)
Marking resolution 2 µm
Scan speed Max. 12,000 mm/s
Character type Font KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font*2
Barcode CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
2D code QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
GS1 DataBar GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
Logo image Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF
Marking conditions Marking style Stationary marking, Moving marking (constant, encoder)
Character size (height ? width) 0.01 to 125 mm
Number of registered programs 2,000 max.
Number of blocks 256
Input / Output Terminal block I/O, MIL connector I/O, contactor control I/O
Interface RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) *3
Marking unit installation direction All directions
Marking unit cable length 4.3±0.1 m
Cooling method Forced air cooling
Rated voltage and power consumption Single-phase 100 to 240 VAC±10 %, 50/60 Hz, 800 VA max.
Overvoltage category II
Pollution degree 2
Enclosure rating IP64 (marking head)
Environmental resistance Operating ambient temperature 0 to + 40 °C
Operating ambient humidity 30 % to 85 % (no condensation)
Ambient temperature for storage ? 10 to + 60 °C (no freezing)
Ambient humidity for storage 30 % to 85 % (no condensation)
Weight Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg
Compatible regulations EU directive (EMC directive, low-voltage directive, RoHS directive), EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581), CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1), North America regulations (FCC Part 15B, ICES-001 Class A)
*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *2 The only TrueType and OpenType fonts supported are those fonts whose 'Font embeddability' property is set to 'Installable' or 'Editable.' This property can be viewed from the Properties dialogue boxes of the fonts shown on the [Fonts] screen in [Control Panel] . *3 There are two USB ports : a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IPTM and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IPTM is either a registered trademark or a trademark of ODVA.
''