Описание

Controller English Display Type
Model IM-6600E
Type Controller
Image sensor 1' 6.6 mega pixel CMOS
Display 10.4' LCD monitor (XGA: 1024 ? 768) External monitor connectable (clone output)
Receiver lens Double telecentric lens
Image measurement Field of view Wide field: o100 ? 200 mm, High precision: 25 ? 125 mm
Minimum display unit 0.1 µm
Repeatability W/o stage movement Wide field: ±1µm High precision: ±0.5µm
With stage movement Wide field: ±2µm High precision: ±1.5µm
Measurement accuracy (±2?) W/o binding Wide field: ±5µm*1 High precision: ±(7+0.02L)µm*2
With binding Wide field: ±2µm*3 High precision: ±(4+0.02L)µm*4
External remote input No-voltage input (with contacts, without contacts)
External output OK/NG/FAIL/MEAS. Relay outputRated load 24 VDC 0.5AON resistance 50 m? or less
Interface LAN RJ-45 (10BASE-T / 100BASE-TX / 1000BASE-T)
USB 2.0 series A 6 ports (front: 2, rear: 4)
Record Hard disk drive 250 GB
Illumination system Transparent Telecentric transparent illumination (Green LED)
Ring Four division ring illumination (White LED)
External Externally connected illumination
X stage Moving range 100 mm (electric)
Withstand load 2 kg
Z stage Moving range 30 mm (electric)
Measurement points 99 points max. (99 ? 9 points possible when the function for consolidating measurement settings is used)
Pattern search (profi le tracking function) XY? (with 360° rotary position compensation)
Pattern registration 1000 patterns or more*5
Measurement time 2 seconds*6
Basic measurement function Distance measurement 8 types (point-point / line-point / line-line / circle-point / circle-line / circle-circle / circle / arc)
Angle measurement Provided
Calculation
Virtual line function Point Middle point / intersection
Conjunction edge Line conjunction / circular conjunction
Line 6 types (midline / perpendicular line / parallel lines / tangent line / line passing through a point / approximate line)
Circle Middle circle / approximate circle / auxiliary circle / inscribed and circumscribed circle
Application tool Pitch measurement Line / circumference
Pitch angle
Width measurement Edge width
Thickness measurement Thickness measurement / gap measurement between inner and outer diameters
Special tool Rounded corner / curved surface / oval / reticle / point position / perimeter / area / screw / automatic measurement
GD&T Shape tolerance Straightness / circularity / profile
Orientation tolerance Squareness / parallelism
Position tolerance Point position / concentricity
Element tool Point Point (on a line or arc) / maximum and minimum (rectangle, circle, arc)
Line Line / centre line / peak line
Circle Circle / arc / peak circle / peak arc
Profi le extraction Provided
Special tool Automatic generation / gauge line
Manual measurement Provided
Coordinate system confi guration
Batch confi guration of tolerance
Element list editing
Measurement setting data binding function
DXF export function
Automatic measurement function
Q-DAS data save function
Measurement settings support functions Provided*7
Power supply Power voltage 100 to 240 VAC 50 / 60 Hz
Power consumption 310 mA or less
Environmental resistance Ambient temperature +10 to +35 °C
Relative humidity 20 to 80 % RH (No condensation)
Weight Approx 8 kg
*1 In the range of o80 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position *2 In the range of o20 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position *3 In the range of o80 ? 180 mm from the centre of the stage, within the operating temperature range of +23°C ±1°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) *4 In the range of o20 ? 120 mm from the centre of the stage, within the operating temperature range of +23°C ±1°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) *5 Depending on the measurement setting data and number of data pieces being stored *6 Without pattern search, applied measurement, and stage movement *7 Optimum lighting guide, optimum lighting search, automatic edge extraction parameter adjustment function, and multiple edge extraction function
''