Описание

Amplifier Unit, Main Unit, PNP
Model CZ-K1P
Output PNP
Light source Red LED, Green LED, Blue LED
Response time 300 µs/1 ms (switch-selectable)
Indicator lamp Output: Red LED, Calibration: Orange LED, External synchronization input: Green LED, Matching rate/received light intensity: LCD (Red/Green)
Error indication Excess light intensity, insufficient light intensity, insufficient colour difference
Calibration method 1-point/2-point calibration (switch-selectable)
Tolerance value adjustment Numerical value setting on digital display
Differentiation mode C mode/C + I mode/I mode (switch-selectable)
Timer function OFF-delay timer (40 ms)/Timer OFF (switch-selectable)
Output selection Match output: Turns on when target colour matches registered colour. Mismatch output: Turns on when target colour is different from registered colour. (switch-selectable)
External synchronisation input Response speed: 500 µs max.
External calibration input Input response time: 20 ms min.
Registered colour selection 8-bank selection (By external input), Non-voltage input, Input response time: 20 ms min.
Control output PNP: 40 VDC max. (100 mA max.), Residual voltage: 1.0 V max.
Protection circuit Reverse-polarity protection (power supply), overcurrent protection (output), surge absorber (output)
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption 75 mA or less
Environmental resistance Ambient light Incandescent lamp: 5,000 lux max., Sunlight: 10,000 lux max.
Ambient temperature -10 to +55 °C (No freezing)*1
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions
Case material Polycarbonate
Weight Approx. 115 g (including 2-m cable)
*1 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended
''